|
| Bộ truyền dẫn tín hiệu video (active)
-
Active Video Twist Pair Transmission
-
Three position range switch for gain select on transmitter
-
Five position distance ranges switch on receiver, brightness adjustment
-
Built in transient protection and ground lifting
-
System is intergrated with alarm sensor (PIR, Magnetic, etc..) or RS485/422 data |
|
| Bộ nhận tín hiệu 4 kênh
-
4 Channel Active Receiver
-
Built in 4 port active receivers
-
Others identical same as STP111VR
-
Built in a highly balanced mode of video transmission for extra interference immunity |
|
| Coaxial video ground loop isolator
-
Coaxial video ground loop isolator
-
BNC male to BNC female with mini cable 15 on both sides
-
Passive, no power required
-
Prevents video-signal distortion caused by video ground loops
-
Eliminates picture tearing, cross talk and rolling
-
Prevents power cables laid by others interfering with the CCTV system
-
Built in TVS (Transient Voltage Suppressors) for surge protection |
|
| Channel Video Transceiver With Data
- 4 x BNC female + 1 x RJ45 female + 1 x terminal block( for RS422, RS 485 data transmission).
- Using 4 pairs CAT 5 cable to transmit/receive 3 sets video signals plus 1 data signal or transmit/receive 4 sets video signals only.
|
|
| Channel Video Transceiver With Extra Interference Rejection
- 4 BNC female to 1 x RJ45 female.
- Perfect work with DVR to immunity DVR interference.
- Built in a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise: Data signals, other video, nearby power, ringing telephones, fluorescent lights, transformers, and more....
|
|
| Channel Video, Power, Data Transceiver
- 4 x BNC female +DC power to 4 x RJ45 female + 2 pin terminal for data.
- Video, camera power, data (RS422, RS485) transmission over one standard CAT 5 cable.
- Built in PTC fuse for short protection.
- Use with STP111VPD, transmit 4 channels video, power, data over 4 CAT 5 cable.
|
|
| Video $ Power Transciever
- To send video $ power via one CAT5 UTP cable.
- 6 pin terminal connector for easy connection.
- Power cable could be one/two/three pairs option based on camera power consumption and transmission range.
|
|
| Channel Video Transceiver
- 4 x BNC female 1 x RJ45 fimale + 8 pin terminal block.
- Four passive transceivers in one product.
- Choice of RJ45 or push pin terminal inputs/outputs.
|
|
| 4 Amp DC12V Regulated 8 Port Power Supply
- DC12V Regulated
- Red LED for main power.
- Individual green LED for power indication.
- Individual PTC 1.1Amp, (2.5A/4sec.) fuse on each output protection.
- Toroidal transformer for high effeciency and low operating temperature.
- Built in surge protection
- Wall mounting metal box
- Overall Dimension: 330 x 210 x 89.5 mm
|
|
|
|
|
